PVsyst Training
Syllabus for PVsyst Training
Session-1 Basic Concept of Survey
i) What is the purpose of the Software?
ii) Explanation of Meterological data & SIT
ii) Explanation of PAN file, OND file and BTR file
iii) How to create any Project ?iv) How to import & Export any project in Pvsyst?
Session-2 Explanation of ‘Project Settings’ Tab
i) What are the values you need to cosider in Project Settings Tab
ii) What is the meaning of Albedo?
iii) Explanation of Temperature effect in PV plant
iv) Significance of Temperature co-efficient
v) What is Overloading ?
vi) What is clipping loss?
Session-3 Explanation of ‘Variant’ and ‘Orientation’ Tab
i) What is the meaning of ‘Variant’? How to use it
ii) Explanation of Azimuth Angle ?
iii) How to decide the optimum tilt angle?
iii) Explanation of different field type?
iv) What is transposition factor?
Session-4 Explanation of ‘System’ Tab
i) How to decide the project capacity
ii) How to choose the inverter & module?
ii) How to decide the string according to MPPT?
iv) What is the role several orientation in ‘System’?
Session-5 Explanation of ‘Detailed Losses’ Tab
Explanation of each sub-tab under ‘Detailed Losses’ Tab
Session-6 Explanation of ‘Self Consumption’, ‘Storage’ and ‘Horizon’
i) Explanation of Load Profile
ii) Which load profile to choose for Self Consumption
iii) How to design the Hybrid PV Plant using Storage tab
iv) What is the meaning of ‘Far Shading’? When to use?
V) How to decide the ‘Horizon Line’?
Session-7 Explanation of ‘Near Shading’ Tab
i) How to draw layout in Pvsyst?
ii) How to import sketchup drawing in Pvsyst?
iii) Explanation of Shading Factor
Session-8 Explanation of ‘Module Layout’ & ‘Energy Management’ Tab
i) How to Draw the string layout in Pvsyst?
ii) What is the meaning of P50, P75 & P90?
Session-9 Explanation of ‘Economic Evaluation’ Tab
i) How to do the costing in Pvsyst?
ii) How to get ROI and Payback period from Pvsyst?
Session-10 Detail explanation of Pvsyst report
How to study the Pvsyst report and what are formulas you need to consider?
Session-11 Explanation of Off-Grid System Design
i) How to calculate the load requirement
ii) How consider the Module & Stand alone inverter
iii) How to consider losses for off-grid system
iv) How to study the final report for Stand-alone system
Session-12 Explanation of Pumping System Design
i) How to calculate the water requirement
ii) how to choose the Pump and controller
iii) How to consider losses for Pumping system
iv) How to study the final report for Pumping system
Session-13 Q & A
Question & Answer Session
Course Fee: Rs. 5,000/-
Course Period: 2 Weeks (It may increase according to session)
Terms and Conditions
You are not allowed to share any documets
100% of the Course fee need to pay in Advance
Total 16 Number of classes will be available in this package, Each session having 1.5-2 Hours.
Overall training will be conducted on Zoom Video call. All session will be live session.
AutoCAD Training
Syllabus for AutoCAD Training
Session-1
Basic Concepts of PV Plant
i) Types of Solar Power Plant
ii) Selection of PV Module Technology and Rating as per the Datasheet
iv) Types of Solar Inverter & Selection of Inverter as per PV Plant
v) Concept of Microinverter & Power Optimizer
vi) Clipping Loss explanation
Session-2
String Sizing & Component Design of Solar Plants
i) Series-Parallel Combination for Solar Module
ii) Manual Calculation of PV Plant String Sizing
iii) MCB & MCCB Selection
iv) How to Design the DCDB, AJB & SCB?
v) How to Design ACDB Switchgear for different Solar Plants?
Session-3
Selection & Sizing of AC Cable & DC Cable
i) Derating Amp Calculation
ii) Sizing of Solar Cable
iii) Derating Factor of Cables
iv) Voltage Drop & Power Loss Calculation
Session-4
Basic Understanding of AutoCAD Software
i) Basic overview of the AutoCAD software
ii) How to Use the command in AutoCAD
iii) Sample Drawing practice
Session-5 & 6
SLD Preparation
i) Electrical symbol of Solar Plant in AutoCAD
ii) How to draw different component like DCDB, AJB & ACDB
iii) How to Draw SLD for Off-Grid & Hybrid PV Plant
iv) How to Draw SLD for Solar Pumping system
Session-7 & 8
Earthing, LA Calculation & String Layout
i) How to find no. Earthing required as per plant capacity
ii) How to design LA as per plant capacity
iv) How to draw Earthing and LA Layout of PV Plant
iii) How to drawstring layout of any pv plant
Session-9
Basic Idea of Array Layout & Structure Drawing
i) How to draw Array Layout by using SketchUp drawing
ii) Basic idea of structure drawing
iii) Question & Answer clarification
Course Fee: Rs. 3,000/- or 42$ USD
Course Period: 1 Months (It may increase according to session)
You are not allowed to share any documets
Terms and Condition
80% of the Course fee need to pay in Advance
Total 9 Number of classes will be available in this package, Each session having 1.5-2 Hours.
Overall training will be conducted on Skype/Zoom Video call. All session will be live session
along with the recording sessions
SketchUp Training
Syllabus for SketchUp Training
Session-1
Software Download, Site Survey & Feasibility Assesment
i) How to downlaod and install the software
ii) Site Survey procedures
iii) Expanation roof top survey drawing
iv) Explanation of Tilt Angle
v) Explanation of Azimuth Angle
Session-2
Plant Layout session 1
i) Basic concept of sketchUp software
ii) What are the use of Different toolbars in SketchUp
iii) How to use the command in sketchUp
iv) How to draw layout in SketchUp for Rooftop & Ground Mounted projects
Session-3
Plant Layout session 2
i) How to draw the Layout in SketchUp for different Roof-top projects
ii) How to draw Azimuth Angle?
iii) How to decide the optimum tilt angle?
iv) Explanation of Pitch & Inter-row spacing
v) How to draw different orientation in sketchUp(East-West shading roof)
Session-4
SketchUp training with Skelion
i) Explanation of skelion plugin with SketchUp
ii) Shadow analysis report in Skelion
iii) How to export .h2p file and import to Pvsyst
iv) Tracker in SketchUp
Session-5
Structure Drawing in SketchUp
i) How create components in SketchUp and use
ii) Drawing of each part of Solar Structure
iii) Easy use of Solar structure for 3D modeling
iv) Structure Drawing in SketchUp
Session-6
Layout software training
i) How to use the Layout software in SketchUp
ii) How to create a 3D layout drawing using Layout
ii) How to give the dimension & marking of objects
Session-7
Q & A
Question & Answer Session
Course Fee: Rs. 3,000/-
Course Period: 1 Months (It may increase according to session)
Terms and Condition
You are not allowed to share any documents
80% of the Course fee need to pay in Advance
Total 9 Number of classes will be available in this package, Each session having 1.5-2 Hours.
Overall training will be conducted on Skype/Zoom Video call. All session will be live session.